Kaneg DUCATI FRAME SLIDERS:

MULTISTRADA / HYPERMOTARD (-'12)/
MONSTER-series / S4R / SPORT CLASSIC/ GT
Not suitable for the Monster 1200/ 821

WE SUPPLY THE BOLT AND YOU CUT IT TO THE CORRECT LENGTH.

For Ducati models with 12mm mount holes

SUPPLIED.

Type 1 and type 2 are the same system with your choice of Deldrin or Alloy Pucks.

Type 1: Hard DELRIN Pucks.

Type 2: Anodised ALLOY Pucks.

PLUS

Offset frame collars

12mm diameter Stainless Steel threaded through-bolt, nuts and washers

For Motorcycles with a bikini fairing, we recommend  the LONG Slider Puck

DIY

Tools to complete the job.

FIXING

We recommend a Motorcycle Mechanic fix these sliders.

Undo the TOP engine bolt nut and slide out the engine bolt

AND use the OEM engine bolt as a reference to cut the supplied Rod to length

Make up 1 puck side: slide on a washer, puck and spacer onto the bolt end with the already fixed nut.

Slide the bolt through the frame, then place the spacer, puck and washer onto the exposed bolt end.

Fix and tighten the nyloc nut to 40Nm.

Ensure all fixings are tightened to Ducati’s specification.

If you are Sydney or Perth or Melbourne based, contact us for a fitting Quotation.