EVO HD 3 Step Adjustable Temperature 50 / 90 /110 °C ,

• Easy to Adjust with the 3 keys board.

Thermal Technology

Italian R&D

Italy Fabrics

Electronics manufactured in the U.S.

and Manufactured in Romania

Main Features

• The heat cable location is linear with a longitudinal layout, complemented by a transverse layout to the Warmer centre.
• Position the Warmer at the Rim edge to fully heat the tyre shoulder and Rim, achieving a uniform temperature over the tyre.
• The benefit of a transverse cable location is to heat the Tyre Shoulder and Wheel Rim, ensuring a uniform temperature throughout without a temperature drop off when entering the track.
• The Carbon Fibre heating technology built into this Warmer is the same Carbon fibre heating technology built into the TT MotoGP quality Warmers
• 
  

Features:

Refer to the Specification Sheet for all Technical details.

• Side Wall Width: 40/70mm
• 3 STEPS Adjustable Temperature 50 / 90 /110 °C
• Control Led: Control Unit
• Outer Fabric: Heavy Polyester Fabric Cordura effect
• Inside Fabric: Nomex
• Insulation: Single 6mm reflective layer insulation
• Electric Section: Transversal and longitudinal electric layout
• Fastening: Velcro Fabric Fastening Tie
  
• Elastic Stretcher: Stretcher on side wall and heating section
• Power Supply: 230V
• Power Consumption: Front 370W, Rear 560W
• Resistors: Carbon Fibre
• Temperature Control: Electronic control unit
• Power cable: 1800 mm bipolar
• Washable: Yes
• Repairable: Yes
• 
  

NOTE:

If a Heat Cable overlaps or touches another the Warmer Fabric Casing will melt,

Do not leave the warmer switched on.

Do not leave the warmers in a bundle/pile.

Please take good care of these warmers to ensure a long and useful working life.