KANEG MOTORCYCLE PINNED FRONT STANDS:

Pinned Fork Leg Font Stand

Honda CB400

Honda NS400R

Honda RVF400 NC35

VFR400R NC21/NC24/NC30

VF400 NC13

This stand is designed for motorcycles with a Single sided Disc,

with a single Brake Calpier the standard  Front Stand under Fork dual Pin Pickup won't work

Our Market proven Kaneg professional racing paddock stands will give years of reliable service.

210mm Pin Centres, the Pin Fork Lift engages in the holes at the base of the fork legs

2 Solid Black wheels per stand (not the clear wheels as shown in the photo), manufactured from 32mm steel tube with added frame bracing to give a superior rigidity and strength.

Lightweight at only 4kg , preassembled and ready to use.

Since 2006 Kaneg has been proudly serving the Motorcycle Racer, Rider and Enthusiast alike.

We race at the following Circuits, so make a point of catching up;

Eastern Creek, Phillip Island, Broadford, Mac Park, Morgan Park, Wakefield and occasionally QLD

See us at:

www.kaneg.com.au

sales@kaneg.com.au

 Or phone

Phil 0414968949

Rhys 0414712419

The fine print

Thank-you for your purchase of our paddock stand, when using our product please note;

You shall need an Allen key + ring spanner or socket + lock tight for rear stand hook bolts to complete the stand assembly.

Before securing the Stand Bolts/Bolts & Nuts, check measure the pickup width to ensure the correct and a secure position

then tighten all bolts & nuts then tighten the bolts to about 40Nm.

Locate the stands and motorcycle on a hard and level surface.

Never use a Front Stand without having the KANEG rear stand engaged to support the motorcycle.

Do not move the motorcycle when supported by the pinned lift stand.

Do not sit on the motorcycle whilst the bike is supported by the stand.

Monthly check-tighten all bolts and nuts.

After manufacturer and painting, each stand is factory assembled to ensure an accurate parts fitment, during this assembly the stand paint may be scratched.

Paint scuffs, scratches and blemishes shall not be considered as a fault in manufacture.