We treat our customers the way we like to be treated!
YAMAHA SWING ARM PROTECTORS
These swing arm protectors are CNC machined from a
solid bar of 6061 grade aircraft aluminum.
They come as a pair and include the 6mm bolts that you need to install them.
If your bike has a threaded hole at the bottom of the swingarm, but you are not sure if it is a 6mm, 8mm or 10mm hole,
you can estimate its size by using a 1/4" or a 3/8" drill bit. If the 1/4" drill bit is just a hare too big to fit into the hole,
it is a 6mm hole. If the 1/4" drill bit goes all the way in the hole, but the 3/8" drill bit is too big, then it is an 8mm hole.
If the 3/8" drill bit goes in the hole or very close, it is a 10mm hole. As far as I know, it will either be 6mm, 8mm, or 10mm
as these are the only three sizes found on Japanese sportbikes