Loading... Please wait...
Categories
- Bar Ends
- Caps
- Combos
- Conversion Kit
- Crash Knobs
- Flat Platforms
- Front Stand
- Fuel Caps
- Head Lifting Stand
- Headlift Stand Extra Pin
- Head Lifting Stand Top Section Conversion
- Hex Tool
- Hydraulic Brake Switch
- Knee Sliders
- Lock Nut
- MX Stand
- Postage Overnight NSW ONLY
- Ramp
- Rearsets
- Rearsets Spares
- Rear Hooks
- Rear Stand
- Single Swing Arm Stand
- Specials
- Spools - Small
- Swing Arm Protectors
- Tie Downs
- Trailermate Stand
- Tyre Warmers Digital
- Tyre Warmers Non Digital (see it under "Specials")
- Valve 90 Degree
New Products
Our Newsletter
- Home
- Head Lifting Stand Top Section Conversion
- Head Lifting Stand Top Conversion - Green
Head Lifting Stand Top Conversion - Green
Product Description
HEADLIFTING STAND TOP CONVERSION
To be used with a KANEG Under Fork Front Stand to convert it into a
Headlifting Stand
-
Simply take out the pronged under fork kit and attach the headlifting kit to the front stand
-
Solid 32mm steel tubing
-
Comes with 5 pins (sizes:13 /15 /16.5 / 17 /18mm)
-
Additional pin sizes are $14.95 extra each (19/20/21/24/27mm)
-
Also included are the necessary bolts and pins
-
The Head Lifter picks the front of the bike up using the hole in the bottom of the steering stem. Allows the removal of the wheel and forks.
-
Note: Some bikes may have parts which impede access to the steering stem hole. Others may not have a hole at all
-
Available in attractive silver & green powder coating
CONTACT INFORMATION
0414 712 419
All KANEG products come with a 12 Month Warranty
We treat our customers the way we like to be treated!
|
Parts Installation/Fitment Policy
Motorcycles can be dangerous. Kaneg has no control over the use of any part. Kaneg is not responsible or liable for any damages or possible injury incurred, possible accidents due to driver error, incorrect installations, bad judgments or acts of nature. Buyer understands that some parts may need modifications for correct fitment, removal of factory lights, bodywork etc. We recommend you have a skilled technician install the parts purchased. Kaneg expects the customer to exercise good judgment as to the proper selection, installation, use and maintenance of any part.
|
